Tabla de contenido
Publicidad
fertige Espresso durch das Steigrohr (D).
Reinigungshinweise
Spülen Sie die Einzelteile der Espressokanne. Ersetzen Sie die
Dichtung (C), wenn sie abgenutzt ist.
Die Garantie schließt den unsachgemäßen Gebrauch der
Espressokanne nicht ein!
GB
Care & safety instructions
Dear kela customer,
We congratulate you on the purchase of your long-lasting quality
product from kela. In order to have many years of enjoyment with
it, please read the following product information and instructions
for use and care, as well as the safety recommendations.
HAZARDS AND SAFETY INFORMATION
In your own interest, please read the operating instructions
before using for the first time and pay attention to the following
hazards and safety information. This will help to prevent acci-
dents and technical malfunctions.
Please note:
• Never leave children unsupervised near the appliance.
• Make sure that the steam outlet is pointing away from the user.
• Only use the espresso maker for the purpose for which it is
intended.
• Make sure that the espresso maker is closed before switching on.
• Do not press the closing/opening system before the espresso
maker has cooled down, once it has been removed from a hot
heat source.
• Never touch hot points – use the handle and knob.
• Never use the espresso maker without water in the kettle.
• Use suitable heat sources in accordance with the operating
instructions.
• Only use kela spare parts recommended for the respective
model.
BEFORE USING FOR THE FIRST TIME
Clean the espresso maker thoroughly without using detergent or
scouring agents. Once you have cleaned the espresso maker,
complete the steps required for preparing espresso twice, with-
out using espresso powder.
PREPARATION
Unscrew the upper section (F) from the lower section (A) and re-
move the funnel (B). Fill the lower section (A) with water, making
sure that the water remains below the safety valve (E). Fill the
funnel (B) lightly with espresso powder. Make sure that the filter
and rubber gasket (C) at the bottom of the upper section (F) are
correctly positioned. Now screw the upper section (F) securely
4
Publicidad
Tabla de contenido
