Sony XDBK-104 Manual De Instalación página 12

Note
You need the designated password when you move
the option key. Record the password as a reminder.
6
Press the SET function button (F5).
Installation begins.
When installation of the option key ends
successfully, the XDS automatically enters
the standby state and restarts.
After the XDS is restarted, the installed
option key becomes valid.
12 Moving the Option Key
Moving the Option Key
You can move the option key from one XDS unit
to another.
First remove the option key from the XDS on
which the option key is currently installed to this
SxS memory card in the following procedures:
Next, carry out the procedure described in
"Installing the Option Key" to install the option
key on another XDS unit.
Note
Be sure to move the option key to this SxS memory card.
The operation of the option key is not guaranteed if it has
been moved to an optional card.
1
Insert this SxS memory card into card
slot A on the XDS.
Note
The card slot B on the XDS does not accept this SxS
memory card.
2
Display the maintenance menu and
select maintenance menu item
M23:OPTION KEY under M2:
SERVICE SUPPORT. (See step 2 in
"Installing the Option Key.")
3
Select "REMOVE."
To cancel the removal
Press the EXIT function button (F6).