Plantronics VistaPlus DM15 Manual Del Usuario página 7

ADJUSTING THE TONE CONTROL
The tone control lets you improve the clarity of calls. There are three
settings; push the tone control button
test call and select the preferred setting.
HEADSET / HANDSET MODE
VistaPlus can be operated in two modes: headset or handset. To use
headset mode, press the headset button
so that you can see the red square. Press this button again to switch to
handset mode. In handset mode, the telephone can be used normally.
USING THE MUTE SWITCH
VistaPlus has a mute button so that you can still hear the caller, but
they cannot hear you. To use the mute function, press the mute button
so that you can see the red square indicator. Press the button again
when you want your caller to hear you. Note that mute only works with
headset, not with handset.
LEAVING YOUR DESK WHILE MAKING OR TAKING A
CALL
If you need to leave your desk during a call, you can keep your
headset on and simply disconnect the QD connectors. On some
systems, this may hang up the call or place it on hold.
WARNINGS
The LED indicator on the top of the adapter serves two purposes:
G
To indicate when you need to change batteries. The light will flash
every two seconds.
G
To indicate when SoundGuard Digital protection is active. The light
will go out when the noise goes away.
MAKING & TAKING CALLS
while you are making your
on the top of the adapter
GB
5