Operation And Functions - Schubert Etude 255 USB Manual Del Usuario

Operation and Functions

Press [Power On/Off], and the keyboard will light up from both sides, and the LCD display will turn on and
show the current Tone, tempo and other status. Then you may operate the Keyboard as required.
Key lighting
The Keyboard has luminous function, under the mode of playing, training and playing demo song, the light
hint will be provided. The luminous function is defaulted to be enabled, press [KEY LIGHTING] to enable or
disenable the luminous function.
Master volume adjustment
Press [MASTER VOL +/–] to turn up or turn down the master volume. "VOLUME" and the current volume level
will be shown on the display. Press [MASTER VOL +/–] simultaneously to reset to the default value.
The master volume can also control the accompaniment volume.
Accompaniment volume adjustment
Press [ACCOM VOL +/–] to turn up or turn down the master volume. "RC-VOLUME" and the current volume
level will show on the display. Press [ACCOM VOL +/–] simultaneously to reset to the default value.
Timbre selection
The Keyboard provides 255 timbres, from "000" to "254", for your selection. When turning on the keyboard,
the timbre selection function will be enabled automatically, and "TONE" and current timbre number will show
on the displays. When under other states, press [TIMBRE ] to enable the Tone selection function. The Tone is
defaulted to be "000", and it can be adjusted by pressing the corresponding number buttons or pressing the
"+" /"-"button.
Playing Percussion
This Keyboard provides 61 kinds of keyboard percussions. Press [KEYBOARD PERCUSSION] to convert the key
to percussion key. Each key corresponds to one percussion instrument. Press this button again to disenable the
keyboard percussion function.
Playing demonstration songs
50 demo songs have been stored in the Keyboard, from "000" to "049", for your selection. Press [DEMO
SONG] to play all demonstration songs in order, the luminous key will flash to the melody, and "SONG" and
current demo song number will show on the display. Press the number buttons or"+"/"-" buttons to select the
demonstration song. When pressing [TIMBRE] during the demonstration song playing process, "TONE" will
show on the display, press the number buttons or the"+"/"-"button within 3 seconds to select other Tones
for playing the demonstration song. Press [START / STOP] or press [DEMO SONG] again to stop playing the
demonstration song.
18