Aiwa Exos-3 Guia De Inicio Rapido página 7

Pairing two speakers
1. Make sure the speakers do not have an active Bluetooth connection (disconnect by
pressing the Bluetooth button if needed.)
2. Power on both speakers, press the Stereo Pair Button on the one you wish to be the
primary speaker. The secondary speaker will automatically connect and you'll hear an
audible prompt when pairing is successfully completed.
3. The primary speaker's blue LED will blink (this speaker will play the left channel audio)
and the secondary speaker's blue LED will illuminate continuously (this speaker will play
the right channel audio.)
4. Connect your phone or tablet to the primary speaker via Bluetooth or Aux input to the
primary speaker.
Notes:
• The two speakers will remain paired even when phones are disconnected, to disconnect
the secondary speaker, simply press the button on the primary speaker.
• While two speakers are paired, some controls will only be operational on the primary
speaker.
Power bank function
device is fully an audible indicator will be heard, and charging will cease.
Charging
2. Charging additional devices from the USB port will reduce battery life accordingly.
3. The power indicator will blink while charging. The 4 red LEDs indicate current battery
level. When all 4 are fully illuminated, the device is completely charged.
4. Charge time: Approximately 4 hours from fully depleted to fully charged.
Notes
The device should be fully charged before long-term storage and recharged every 3
months to ensure the battery operates at full capacity.