Uline H-937 Instrucciones De Funcionamiento

H-937
12" LAMINATOR
1. Connect power cord to appropriate power source.
2. For lamination, select the button for the appropriate
pouch gauge thickness. The button will blink until it
is ready.
3. Position the document to be laminated into a
laminating pouch.
4. When the "Ready" light turns on and the machine
beeps, insert the pouch and its contents straight into
the machine, leading with the sealed edge.
NOTE: No carrier pouch is needed when
loading into the machine.
PAGE 1 OF 3
1-800-295-5510
uline.com
OPERATION INSTRUCTIONS
WARNING! For your protection, do not
connect the laminator to electric power
until you read the original manual
thoroughly and familiarize yourself with
all controls and operating features before
proceeding to use.
5. The laminated item will automatically exit the rear of
the machine.
6. You can select a different pouch thickness. If you
select a lower setting, the laminator must cool down
to that setting before laminating. The "Ready" light
will glow when the laminator is ready.
7. If you have finished laminating, push the power
button to turn off the machine.
Para Español, vea página 2.
Pour le français, consulter la page 3.
0521 IH-937