unGer HiFlo DI100 Guia De Inicio Rapido página 4

Thank you for your purchase of the Unger HiFlo™ DI100 water system.
This guide will help you get setup and using your system right away.
1. Start-up
The resin vessel is supposed to be used for water applications only. The cartridge
is meant to be used with resin. It may also be used with gravel or other water
filtering media. It comes with an internal distribution system. This makes filling
the vessel much easier and insures high resin recovery due to uniform flow
through the cartridge.
Contents
The filter is delieverd ready-to-use, including resin filled in.
Picture
2. Operation
Connect a hose with standard connector with the water feed adapter (male) and the
hose from your water-fed-pole at the outlet connector (female).
Flow direction is marked with an arrow on the distribution head.
Open feed water supply and rinse resin for min. 3 minutes
(rinsing water volume around 3 x resin volume). After rinsing check
whether drain water is already clear (with Unger TDS-metre #ROTDS),
if not keep on rinsing until product water is clear.
Check connection tubes and adapter head for leakages.
(Remark: The HiFlo™ Soap Dispenser (#HCD25) can be switched between the output
side, to remove heavy dirt. It is recommended to use „Unger's Liquid" soap to achieve
streak-free cleaning.)
www.ungerglobal.com
4
H F ™ Di100
i lo
Quick Start Guide
Description
Polypropylen-pressure vessel
with integrated distribution system
Distribution head
¾" connections and
½" standard hose barbs
Male hose adapter
Female hose adapter.
Molded pipe adapter
Vessel plug
O-Ring for vessel plug
Closure stopper for inner pipe
Part No.
17413
17414
17421
17422
17418
17419
17417
12346