Connecting The Optional Speaker - Sony HT-A5000 Manual De Instrucciones

Connecting the Optional
Speaker
Connecting the Optional
Speaker with the Manual
Connection
The optional speaker is connected to the
speaker system automatically when it is
turned on. For details, refer to the
operating instructions of the optional
speaker.
If the optional speaker cannot be
connected to the speaker system
automatically, perform the manual
connection by following the steps
below.
1
Press HOME.
The home menu appears on the TV
screen.
2
Select [Setup] - [Advanced
Settings] on the home menu.
3
Select [Speaker Settings] -
[Wireless Speaker Settings] - [Start
manual linking].
The [Start manual linking] screen
appears on the TV screen.
4
Press LINK on the optional
speaker.
The power indicator of the optional
speaker that had LINK pressed
flashes twice repeatedly in green.
5
Select [Start].
The manual connection starts.
The connecting process appears on
the TV screen.
To cancel the manual connection,
select [Cancel].
6
When the optional speaker which
you want to connect displays
[Connected], select [Finish].
24
US
7
Press (enter).
The manual connection is
established and the power indicator
of the optional speaker lights in
green.
Notes
• If you perform [Start manual linking],
[Setup] - [Advanced Settings] -
[Speaker Settings] - [Wireless Speaker
Settings] - [Link mode] is set to [Manual]
automatically.
• Only the speakers for which [Connected]
has been displayed in step 6 connect to
the speaker system. If the optional
speaker is not properly connected,
perform the operation again from step 1.
If Wireless Transmission Is
Unstable
If you use multiple wireless systems,
such as a wireless LAN, the wireless
signals may become unstable. In this
case, the transmission may be improved
by changing the following setting.
1
Press HOME.
The home menu appears on the TV
screen.
2
Select [Setup] - [Advanced
Settings] on the home menu.
3
Select [Speaker Settings] -
[Wireless Speaker Settings] - [RF
Channel].
4
Select the setting you want.
• [On]: Normally select this. The
speaker system automatically
selects the better channel for
transmission. A stronger mode for
wireless interference.
• [Off]: The speaker system selects a
channel from the limited
frequency band to prevent
external wireless interference. If
sound dropping occurs while [On]