Connecting The Hoses - Glacier bay HD461-7027D Guía De Instalación Y Cuidado

Installation (continued)
7
Installing the T-tube
□
From below the deck, push the T-tube (E) onto
the spout shank (1) until it is completely seated.
Place the clip (F) through the slots (2).
1
E
2
F
9
Making the water supply
connections
□
Connect the water supply lines (1) to the
faucet inlets (2). (Supply lines are not
included.)
8

Connecting the hoses

□
Connect the hoses (P) to the bottom of the
hot and cold end valves (K & L), as shown.
□
Align the T-tube (E) in a position that will
allow maximum clearance to connect the
hoses (P).
□
Carefully bend the hoses (P) to t in the
available space, and carefully thread the hose
(P) couplings onto the sides of the T-tube (E).
Tighten all connections with a wrench.
K
2
1
6
L
E
P
P