Radio Mode - Denver DAB-20 Manual De Usuario

Start Up
1. Use the AC adaptor supplied in the package, connect the pin to the DC IN jack
at the rear side of the radio and connect the power plug to the wall socket.
2. To get the best reception, place the radio near a window as possible.
3. Connect your external powered speaker to the Audio out jack on the radio.
4. Plug in the wire antenna supplied in the package to the ANT jack.
5. Extend the wire as far as it can go to get the best reception. You may need to
move it around to obtain the optimal direction for the best reception.
6. Power up the radio by using the On/Off switch on the rear side of the radio.
The display will light up and display as follow. The radio will start in DAB mode
by default and followed by a full scan of the radio stations automatically:
7. If there is problem on reception, try moving the antenna around or different
direction to improve the reception.
8. When the scan is completed, the first station (alphabetically) will begin to play.
9. Press the <POWER> button once, the radio will change from operation mode
to standby mode.

Radio Mode

The DAB Radio has two modes of operation:
○ DAB Radio
○ FM Radio
Press the <Mode> button to switch between DAB/FM.
DAB Radio Operation
1. If it is the first time using the radio, it will automatically begin "full scan" for
DAB radio stations.
2. When scanning is completed, the stations will list in alphanumeric order and
the first one will be played.
3. The next time you listen DAB mode, it will play the last listened station.
ENG-3