Power Probe Pro-Solder 50 Manual Del Usuario página 4

Adjust the direction of the tip
1. Rotate the black knurled nut to adjust the direction
of the tip
WARNINGS
• When used for soldering and similar applications, this product contains or produces
chemicals known to the State of California to cause cancer and birth defects or other
reproductive harm.
• Potential electrical shock. Do not use soldering iron if housing is cracked or
damaged. Never use in wet area. Do not attempt to repair or modify soldering iron.
Always de-energize device being soldered.
• Potential burn hazard. Hot tip can cause severe burns. Do not touch tip of tool. Allow
tool to cool before touching tip or replacing protective cap.
• Work only in a dry area.
• Work only in areas free from ammable materials.
• Always store the soldering iron in a dry place out of reach of children or
anyone who has not read these instructions.
• Always were eye protection and gloves when operating the soldering iron.
• Never touch the tip of a hot soldering iron or attempt to remove solder from the
tip with your hands.
• Do not use in the fabrication or repair of potable water service systems.
• Always rest the soldering iron where heat from soldering iron cannot damage
nearby items.
• Ensure that switch is in the OFF position when the iron is not in use.
• Tip remains hot after use for several minutes. Ensure tip is cool before storing
the soldering iron. Never leave soldering iron unattended.
• Do not disassemble or modify the battery. The battery contains safety and
protection devices which if damaged, may cause the battery to generate heat,
rupture or ignite.
Knurled Nut
Locking Nut
LED Light
EN
04