Publicidad
Idiomas disponibles
Idiomas disponibles
6
Pair the ON/OFF transmitter with a connected wired product
Make sure that the indicator light on the wired product is green and not flashing.
If not, go back to step 4.
1
How to pair a ON/OFF transmitter to a connected wired product ?
2
To pair a ON/OFF transmitter with a connected lighting micromodule
A
A Press on the ON/OFF transmitter you wish to pair, with taping it three times onto the
micromodule you wish to control.
B The indicator lights on the two products will flash blue rapidly.
C The indicator lights on the two products will briefly turn blue and not flash, and then
the light on the wired product will turn green again and the light on the ON/OFF
transmitter will switch OFF. The pairing was successful.
D Check that the light comes ON.
B
C
The ON/OFF transmitter can only
control
one
product (micromodule or switch or
plug or cable outlet).
C
14
wired
connected
D
Publicidad
