Spectro-UV Spectroline uVision Serie Manual Del Usuario página 5

KEY FEATURES
• Nominal steady state intensity of 7,000 µW/cm² at 15 inches (38cm).
• Large 7 inch (17.8 cm) diameter coverage area at 15 inches (38 cm) with a minimum UV-A
intensity of 1,200 µW/cm².
• Less than 1.0 foot-candle (11 lux) emission.
• Long-lasting UV-A lenses.
• Cool running, fanless design.
• Lightweight and rugged construction.
• White Light, LED Inspection Light.
• BP-30 Battery Pack (approximately 4.5 hours of operational time before recharging).
• Certificate of Light Output Included (AM17025-CLO)
• IP65 Rated: The uVision™ Series lamps are protected from total dust ingress and from
low pressure jets of water (from all directions). For more details, consult EN 60529 (British
BS EN 60529:1992, European IEC 60509:1989).
TECHNICAL SPECIFICATIONS
uVision™ Series
UV-365MEH
Height
Length
Width
Weight
Light Source
ELECTRICAL SPECIFICATIONS
Input:
Output:
POWER CORD SPECIFICATIONS
LAMP PART NUMBER
UV-365MEH
UV-365MEH/F
UV-365MEH/FA
UV-365MEH/FB
*Each lamp is fitted with an 8-foot cord and the appropriate plug for the country of destination. An
optional 20-foot cord is available. The "/20" suffix denotes the 20-foot power cord options.
*See next page for detailed power cord information.
UV-365MEH Technical Details
POWER REQUIREMENTS*
120V/50-60Hz
230V/50Hz
240V/50Hz
230V/50Hz
UV-A (365nm) and white light
7.5 inches
4.25 inches
3.5 inches
1.92 lb. (871 g) without power supply
3 UV-A LEDs, 1 white light LED
100-240V AC, 1.5A, 50-60 Hz
15V DC, 2A
5