Before First Use - AEG KH 4222 BT Instrucciones De Servicio

English
22

Before First Use

1. Charge the battery before first use. See details in chapter
"Charge Integrated Battery".
Charge Integrated Battery
The player is powered by the integrated rechargeable lithium
battery. Charge the battery as follows:
1. Plug the 3.5 mm jack from the charging cable into the
socket (7) of the headphones. Connect the USB plug to
a powered-on computer. After a short time, the red pilot
lamp (1) will start to blink and the battery will be charged.
After a short time, the pilot lamp will be lit constantly.
2. When the battery is completely charged, the red control
light will blink in irregular intervals.
3. Remove the charging cable from the headphones and
the PC.
CAUTION:
The supplied USB charging cable may only be used
•
with this device. It cannot be used for other devices.
• Never let the device unattended during the charging
process.
NOTE:
• The battery is only charged while the PC is switched on.
• Do not connect the player for a long period of time to
a laptop computer disconnected from mains power
Otherwise the laptop computer' s battery may be
discharged.
• The charging time varies according to battery use.
• Should you not use the device for longer than half a
year, charge the battery at least every 6 to 12 months.
Use
You have two ways to use the device: By cable or cordless via
Bluetooth.
WARNING:
Listening when the volume level is loud may damage the
hearing of the listener.
By cable
1. Connect the 3.5 mm stereo RCA cable to an external
audio source. If required, use a suitable adapter (not
included).
2. Plug the other end of the cable into the socket (7) on the
headphones.
3. Put the headphones on. Observe the labeling on the
inside of the headband. R = Right, L =Left
4. Adjust the volume on the audio source. The VOL /
buttons on the headphones are without function.
NOTE:
The headphones do not have to be turned on when using
them with cables.
Cordless via Bluetooth
Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2,402 and 2,480 GHz in
the ISM band (Industrial, Scientific and Medical). Interfer-
ences can however be caused by WLAN networks, wireless
telephones, or microwave ovens, for example, which operate
in the same frequency band.
Bluetooth technology enables hands-free operation of mo-
bile phones, for example. This device offers you the possibil-
ity to use a Bluetooth-enabled device. The function radius is
thereby restricted device-dependant to ca. 15 meters.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device.
The A2DP profile involves a multi-vendor Bluetooth profile.
By streaming, stereo-audio signals are wirelessly transferred
between the playing device (source) and the receiving
device. To be able to operate the source by remote control,
the player needs to support the AVRCP profile (Audio Video
Remote Control Profile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
• Logging on devices (Pairing)
Before you can listen to music or make phone calls with
the headphones, you need to first register the devices
with each other.
1. Ensure, that the Bluetooth function is activated in
your player (e.g. mobile phone). For this, refer to the
operation manual of your player.
2. Keep the button (3) pressed down until the red
and the blue pilot lamp (1/2) blink alternately. The
device is now set to the pairing mode.
3. Chose the Bluetooth menu in your player and
register the device in your player. For this, refer to the
operation manual of your player. The device "AEG
KH 4222" will show in your player as a selection.
4. Now enter the password "0000" in your player,
depending on the device manufacturers, model, and
software version.
If the registration was done successfully, a short beep sound
will be heard from the headphones. The blue pilot lamp (2)
will quickly blink twice for a short time and then again slowly.