Titan Controls Kronus 1 Guia

®
Kronus 1
Temperature and Humidity Controller
Easy Guide
VANCOUVER, W ASHINGTON U.S.A.
Instructions for Use
1. Mount Kronus 1 in a secure area, but away from
moisture, sprays, pesticides, etc.
2. Plug dehumidifi er into the "Dehumidify Output" outlet.
3. Plug fan into the "Exhaust Fan Output" outlet.
4. Turn the dehumidifi er and fan 'on' to the
highest settings.
5. Set the ' Temperature' and 'Humidity' control
knobs at the preferred temperature and humidity
levels for your garden.
6. Place remote sensor in grow area at plant canopy height.
7. Plug the Kronus 1 into a 120 Volt/15 Amp outlet.
Note: A surge protection device is recommended.
8. Turn Kronus 1 to the "on" position.
9. The Kronus 1 will now activate and deactivate the
equipment based on your preferred settings.
Controller Specifi cations
Size: 9.5" H x 8.5" W x 2.5" D
Weight: 3 lbs.
Voltage Input: 120 Volts
Voltage Output: 120 Volts
Maximum Amperage: 15 Amps
Hertz: 60 Hz
Min/Max Humidity
Control Level: 40% RH to 90%RH
(non-condensing)
Humidity Accuracy: +/- 5%
Min/Max Temperature Control
Level: 45°F to 95°F (7° - 35°C)
Temperature Accuracy: +/- 2°
Cord Set: 6 foot/ 14 AWG
Storage Temperature: 32° to 120°F
(0° - 49°C)
Operating Temperature: 45° to 95°
F (7° - 35°C)
www.titancontrols.net
For technical assistance call us at
1-888-80-Titan or 1-888-808-4826.
Controlling a Dehumidifi er
and Exhaust Fan
Dehumidifier
Remote
120 Volt
Sensor
Power in
®
Kronus 1
Exhaust Fan
Kronus
Sensor