Steren LAM-071 Manual De Instrucciones página 2

Before using your new Steren´s product, please read this instruction manual to prevent
I M P O R T A N T
The instructions of this manual are for reference about the product.
There may be differences due to updates.
Please check our website (www.steren.com) to obtain the latest version of the
instruction manual.
C A U T I O N S
If you do not have knowledge of electricity, consult a technician.
•
Turn the power switch off before that you connect.
•
Do not expose this sensor to extreme temperatures.
•
Do not use or store the equipment near wet places. May cause malfunction or shock
•
hazard.
H I G H L I G H T S H I G H L I G H T S
IP44 (outdoor / indoor)
•
Programmable timer from 5 sec. to 7 min.
•
Detection angle: 160° (horizontal)
•
Motion speed: 0.6 to 1.5 m/s
•
Maximum detection range: 12 m (<24 °C)
•
Environment light: <10-2000Lux adjustable.
•
Installation height: from 1.5 to 3 m
•
I N S T A L L A T I O N
1. Unscrew the lamp´s base.
2. Select where the sensor will be placed. Place the sensor as mold to mark the corresponding
holes for its mounting and do the drillings.
3. Remove the plastic from the base to insert the cables of connection, later you can fi x the
base.
4. Make the following connections:
any damage.
6. Adjust the position from the sensor. Turn the
adjustment knob to left to losse or to right to tighten
up.
7. Adjust the socket, unscrew to loose, turn to the
required position and then screw to tighten up.
8. Set the controls from the sensor (they are located on the back of the sensor).
Sens
Sensitivity control from the sensor, in this way the sensor detects movement with higher or lower
sensitivity.
Time
Adjust time in which the lamp will stay on. (Programmable timer from 5 sec. to 7 min).
Lux
Intensity of light control.
9. Insert two 75 W max bulbs in each socket.
10. When the sensor detects movement the lamp turns on and it will be on the programmed
time.
The lamp will be off when there is no movement after of the programmed time.
S P E C I F I C A T I O N S
Input: 110-130 V~ 50-60 Hz 150 W max.
Load: 75 W x 2
Operating temperature: -20 °C to 40 °C
Operating humidity: < 93%
Nominal consumption: 19 Wh/day
Stand by power consumption: not applicable
Product design and specifi cations are subject to change without notice.
Product: Motion sensor lamp
Part number: LAM-071
Brand: Steren
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
5. Place the cover and screw.
+SENS- +TIME- LUX
WARRANTY
CONDITIONS
01 800 500 9000