Monster turbine pro Guía De Inicio Rápido Y Garantía página 8

ENGLISH
2. Use warm water and mild soap on a damp cloth to remove dirt and earwax
from the eartip. Do NoT use harsh cleaning agents.
3. Rinse and completely dry your eartips before placing them back
on your Turbine Pro.
™
4. Carefully push the eartips back onto the Turbine Pro, making sure they
are on the eartube completely
Using The Cable Management Clip
The Cable Management Clip is designed to control the cable and keep it out of your
way, reduce accidental pulling of the in-ear speakers from your ears, and keep
the cable weight off the in-ear speakers so they stay snug and in place in your ears.
1. Put Turbine Pro In-Ear Speaker into your ears, as you usually would when listening.
™
2. Fasten the Cable Management Clip onto your shirt around
the chest or collar area, wherever is most convenient for
the shirt you're wearing.
3. Grab the cable above the Cable Management Clip and pull
it slightly upward, sliding it through the clip to create
enough slack between the in-ear speakers and clip
to allow for head movement and to take the stress
off the in-ear speakers.
11
ENGLISH
Using The Cable Slider
For further cable management, Turbine Pro
a Cable Slider. The Cable Slider is designed to reduce tangles
during storage, as well as work in tandem with the Cable
Management Clip to eliminate sway and bounce while in use.
During use, push the slider about halfway between the V
where the cable split, and the in-ear speakers, then adjust
for your personal comfort. This will keep the cables in a
more compact position, reducing bounce and sway.
To use for the purpose of reducing tangles during storage,
push the Cable Slider all the way up to the in-ear speakers
before putting your Turbine Pro away. Simply push the
Cable Slider back down when ready for use.
comes with
™
12