Neogen Corporation AccuPoint Guia De Inicio Rapido página 2

01.
To power on the reader, press and hold the
center button on your AccuPoint Phoenix. Enter user
name and password if required.
02.
Select Standard Test (when using a site plan) or
Quick Test for general sampling. Under standard
testing, select the correct site to be tested.
03.
Sample your site
by "drawing" a 4" x 4"
square. With a vertical
and horizontal back-
and-forth motion
"fill" in the square.
Consistency
is critical.
05.
Mix gently for two
seconds.
NOTE: do not shake.
04.
Hold the sampler
vertically and fully depress
to activate.
NOTE: the sampler must be
held vertically.