Hisense RB327N4AD2 Manual De Instrucciones página 32

11.Replace the lower hinge part to the
left side and fixing it with the special
flange self-tapping screws.Replace the
adjustable bottom feet parts to another
side and fixing it.
12.Transfer the lower door to the property
position,adjust the lower hinge part,make
the hinge axis into the lower hole of the
lower door,then tight the bolts.
13.Upturn fhe middIe hinge part the
direction 180 degree,adjust its position,
change the washer on the axis to the
Iower side,make the middle hinge axis
into the upper hole of the lower door,tight
the bolts.
14.Transfer the upper door to the
appropriate position.Secure the door's
level,make the middle hinge axis into the
lower hole of the upper door.
middle hinge part
self-tapping screws
15.Transfer the upper hinge part and
make the upper hinge axis into the
upper hole of the upper door,and adjust
the position of the upper door(please
support the upper door with your hand
when doing it),fixing the upper hinge
part with the special flange self-tapping
screws.
16. InstaII the screw hoIe cover on fhe
top right corner of the refrigerator.InstaII
the upper hinge cover(which is in the
plastic bag)on the left corner.Put the
other upper hinge cover into the plastic
bag.
upper hinge cover(left)
17.Open the upper door and install the
door shelves,then close it.
Warning!
When changing the side at which the
door opens,the appliance must not be
connected to the mains.Remove plug
from the mains beforehand.
upper hinge part
screw hole
cover
12