LANDMANN Rexon PTS 4.1 Instrucciones De Montaje página 7

Utilisation
Functional elements (see page 3):
A. Main burner control knob
B. Side burner control knob
Starting up the barbecue:
1. Open the lid on the grill unit (1).
2. Open the gas supply on the gas cylinder (see operating manual)..
3. Each burner has its own ignition system and
they can therefore be ignited individually.
Press the control knob, hold it down, and turn it
anti-clockwise to the MAX position. (2) A loud
click can be heard; this is the piezo ignition.
4. Check whether the burner has been ignited. Carefully look
through the cooking grill to see if flames come out of the burner.
5. If the burner has not ignited, press the control knob and
turn it back to the 0 position. Wait for 5 minutes to allow
the gas in the combustion chamber to dissipate.
6. If the burner has ignited, repeat the above
steps for the remaining burners.
WARNING! Open the cover during the ignition process.
WARNING! Do not bend over the cooking area when igniting the
burners.
WARNING! Each burner can be ignited individually.
WARNING! If the burner has not ignited, press the control knob
and turn it back to the 0 position. Wait for 5 minutes to allow the
gas in the combustion chamber to dissipate. Then repeat the ignition
process.
Switching off the barbecue:
1. Close the gas supply on the gas cylinder (see operating manual).
2. Press the control knob and turn it clockwise to the 0 position.
Notes on the side burner:
Exclusively use cookware on the side burner that has
been approved for use on gas cooking appliances.
To ensure the stability of the cookware, the diameter must not be
less than stated:
min. diameter
Ø 12 cm
1
2
max. diameter
Ø 25 cm
Rexon PTS 4.1
7