Wireless Lan Module (Option); Wlan Driver Installation; Wlan Configuration In Windows - ONE K56-5M Manual Del Usuario

Wireless LAN Module (Option)

Make sure the Wireless LAN module is turned on (and not
in Airplane Mode).

WLAN Driver Installation

Follow the instructions below:
(Intel) WLAN and Bluetooth Combo
1. Click Option Drivers (button).
2. Click 1.Install WLAN Driver > Yes.
3. Click the button to accept the license and click Install.
4. Click Finish.
(Qualcomm) WLAN 802.11ac and Bluetooth 4.1 Combo
1. Click Option Drivers (button).
2. Click 1.Install WLAN Driver > Yes.
3. Choose the language you prefer and click Next.
4. Click Next > Next.
5. Click the button to accept the license and click Next.
6. Click Finish > Yes to restart the computer.
(Third Party) WLAN 802.11b/g/n and Bluetooth 4.0
Combo
1. Click Option Drivers (button).
2. Click 1.Install WLAN Driver > Yes.
3. Click Next.
4. Click Finish to restart the computer.
32

WLAN Configuration in Windows

Make sure the Wireless LAN module is turned on (and not
in Airplane Mode) before configuration begins.
1. Click the icon in the notification area of the taskbar.
2. A list of available access points will appear.
3. Double-click an access point to connect to it (or click it and click
Connect).
4. Enter a network security key (password) if required, and click
Next.
5. You can choose to find other devices or not.
6. When you are connected to the network access point it will
display Connected.
7. Select any connected network and click Disconnect to
disconnect from a connected access point.
8. You can click the Airplane Mode button to turn the mode On or
Off.
9. Alternatively you can click the Wi-Fi button to turn just the Wi-Fi
On or Off.