Vision Fitness TF40 Manual Del Propietário página 12

ASSEMBLY STEP 6
HARDWARE FOR STEP 6 :
ALL
BOLT (L) BOLT (M)
MODELS 20 mm 20 mm
Qty: 4 Qty: 6
CONSOLE BASE
CONSOLE BASE COVER
WATER BOTTLE HOLDER
BOLTS (L)
22
VF_12_Treadmills_OM_Trilingual_Rev2_0.indd 22-23
Open HARDWARE FOR STEP 6.
A
Attach the CONSOLE BASE COVER to the
B
CONSOLE BASE using 4 BOLTS (L).
Attach WATER BOTTLE HOLDERS to left and
C
right HANDLEBARS using 6 BOLTS (M).
HANDLEBAR
IMPORTANT
BOLTS (M)
This treadmill has a pre-waxed belt and
should never be lubricated. Waxing
the belt can cause damage that is not
covered by the warranty.
ASSEMBLY COMPLETE!
LIMITED HOME-USE WARRANTY
WEIGHT CAPACITY
T40 = 400 lbs (182 kilograms)
TF40 = 400 lbs (182 kilograms)
TF20 = 375 lbs (170 kilograms)
FRAME = LIFETIME
Warranty on the frame against defects in workmanship
and materials for a lifetime period of the buyer from the
date of purchase, so long as the device remains in the
possession of the original owner. (The frame is defined
as the welded metal base of the unit and does not
included any parts that can be removed.)
DRIVE MOTOR/CUSHIONING = LIFETIME
Warranty on the drive motor and cushioning against
defects in workmanship and materials for the life of the
product, so long as it remains in the possession of the
original owner.
ELECTRONICS & PARTS
T40/TF40 = 7 YEARS
TF20 = 5 YEARS
Warranty on the electronic components, finish and
all original parts for the period specified above from
the date of original purchase, so long as the device
remains in the possession of the original owner.
LABOR = 2 YEARS
Warranty shall cover the labor cost for the repair of
the device for the period specified above from the
date of the original purchase, so long as the device
remains in the possession of the original owner.
23
8/18/14 11:33 AM