Symbols; Safety Warnings - Festool BHC 18 Manual De Instrucciones

English
Contents
1 Symbols..................................................... 12
2 Safety warnings.........................................12
3 Intended use..............................................13
4 Technical data........................................... 13
5 Parts of the device.....................................13
6 Operation................................................... 14
7 Settings......................................................14
8 Tool holder, attachments..........................14
9 Working with the machine........................ 15
10 Service and maintenance..........................15
11 Environment.............................................. 15
12 General information.................................. 16
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating manual and safety
instructions.
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Do not dispose of it with domestic
waste.
Inserting the battery pack
Removing the battery pack
Hammer drilling
Screwdriving/drilling
Tip or advice
Handling instruction
12
2

Safety warnings

2.1 General Power Tool Safety Warnings
WARNING! Read all safety warnings and
all instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Safe all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-powered (corded) power tools or
battery-operated (cordless) power tools.
2.2 Machine-specific safety notices
Wear ear protectors. Exposure to noise
-
can cause hearing loss.
- Use auxiliary handle(s), if supplied with
the tool. Loss of control can cause person­
al injury.
Hold power tool by insulated gripping sur­
-
faces, when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessory contact­
ing a "live" wire may make exposed metal
parts of the power tool "live" and could give
the operator an electric shock.
Use appropriate detection devices to look
-
for any hidden supply lines or consult your
local utility company. If the insertion tool
makes contact with live cables, it can result
in fire and electric shock. Damage to a gas
pipe can lead to an explosion. Penetration
of a water pipe can result in damage to
property.
Harmful/toxic dust may be produced dur­
-
ing your work (e.g. paint containing lead,
certain types of wood and metal). Inhaling
or coming into contact with this dust may
represent a hazard for operating personnel
or persons in the vicinity. Comply with the
safety regulations that apply in your coun­
try.
Wear a P2 dust mask to protect your
health.
-
Wear suitable personal protective equip­
ment: Ear protection, safety goggles, a dust
mask for work that generates dust, and
protective gloves when working with raw
materials and when changing tools.
CAUTION! Power tool can jam and cause
sudden kickback! Switch off immediately!