Wash cycles and options
Table of wash cycles
Description of the wash cycle
Daily
1 Cotton with prewash: extremely soiled whites.
2 Cotton: extremely soiled whites.
2 Cotton (1): heavily soiled whites and resistant colours.
2 Cotton (2): lightly soiled whites and delicate colours.
3 Cotton: heavily soiled whites and resistant colours.
4 Coloured Cotton: lightly soiled whites and delicate colours.
5 Synthetics: lightly soiled resistant colours.
Special
6 Wool: for wool, cashmere, etc.
7 Silk/Curtains: for garments in silk and viscose, lingerie.
8 Jeans
9 Sport Light
10 Sport Shoes
Drying
11 Cotton dry
12 Synthetics dry
13 Express Wash & Dry
Partial wash cycles
Rinse
Spin
Drain
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
For all Test Institutes:
1) Test wash cycle in compliance with regulation EN 50229: set wash cycle 2 with a temperature of 60°C.
2) Long wash cycle for cottons: set wash cycle 2 with a temperature of 40°C.
Wash options
- If the selected option is not compatible with the
programmed wash cycle, the indicator light will flash and
the option will not be activated.
- If the selected option is not compatible with another
option which has been selected previously, the indicator
light corresponding to the first option selected will flash
and only the second option will be activated; the indicator
light corresponding to the enabled option will remain lit.
Selecting this option enables you to suitably adjust drum
rotation, temperature and water to a reduced load of lightly
soiled cotton and synthetic fabrics (refer to the "Table of
wash cycles"). "
" enables you to wash in less time
thereby saving water and electricity. We suggest using a
liquid detergent suitably measured out to the load quantity.
Easy iron
By selecting this function, the wash and spin cycles will
be modified in order to reduce the formation of creases.
At the end of the cycle the Washer-dryer will perform slow
rotations of the drum; the indicator lights for the EASY IRON
and START/PAUSE options will flash (the first one green, the
second orange).
Max.
Max.
temp.
speed
Drying
(°C)
(rpm)
Prewash
90°
1200
90°
1200
-
60°
1200
-
40°
1200
-
60°
1200
-
40°
1200
-
60°
800
-
40°
800
-
-
30°
0
-
-
40°
800
-
30°
600
-
-
30°
600
-
-
-
-
-
-
-
-
30°
1200
-
-
1200
-
-
1200
-
-
0
-
-
To end the cycle, press the START/PAUSE button or the EASY
IRON button. For the 7 wash cycle, the machine will end the
cycle while the laundry is soaking and the EASY IRON and
START/PAUSE indicator lights will flash.
To drain the water so that the laundry may be removed, press
the START/PAUSE button or the EASY IRON button.
Note: If you also want to run the drying cycle, this option is
enabled only if combined with level "A1" (Iron dry).
Extra rinse
By selecting this option, the efficiency of the rinse is increased
and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
Delay start
To set a delayed start for the selected cycle, press the
corresponding button repeatedly until the required delay
period has been reached. When this option is enabled, the
corresponding indicator light will remain lit. To remove the
delayed start setting, press the button until the text "OFF"
appears on the display.
Detergents
Max.
Cycle
load
duration
Main
Fabric
(kg)
wash
softener
7
7
7
7
7
7
3
1,5
1
3,5
2,5
Max. 2
pairs
-
-
5
-
-
3
0,5
7
-
7
-
-
7
-
-
GB
9