Canopy Factory Sport Serie Instrucciones De Ensamblaje página 3

Step 1:
Remove assembly from portable storage bag. Grab corner
legs in each hand. Lift frame slightly off ground. Stepping
backwards, pull frame apart until your arms are fully ex-
tended.
Step 3:
Do not place hands between frame tubes. Pull out until
canopy is fully opened.
Step 5:
Pull corners down snug, attaching hook and loop fasteners.
Secure hook and loop fasteners around top roof frame.
HOOk AND LOOP
fASTENERS
CORNER Of
SHELTER
Step 7:
TEMPORARY
SPIkE
ANCHOR
Step 2:
Unfold cover. Place cover over frame. Align corner pock-
ets of cover over frame legs.
Step 4:
Slide corner brackets up until pin snaps into place.
Shown without cover for clarity
Step 6:
Slide legs to desired position height, making sure pins
snap into place.
For temporary anchoring of canopy on grass, dirt or packed
soil, insert temporary spike anchors through corner feet.
CAUTION:
Temporary spike anchors are NOT designed
for permanent installation. Never leave canopy unattended.
For all CANOPY FACTORY
be square and straight when temporary spike anchors are
inserted through corner feet.
For assembly questions, Please call Customer Support:
1-800-524-9970 or in CANADA: 1-800-559-6175
Page 3
straight leg Pop-Ups, legs should
™
05_22590_22591_22595_22611_
22612_22640_22644_22648_0C