Princess 282893 Manual Del Usuario página 7

Congratulations!
You have purchased a Princess product.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this product
for many years.
Description (fig. A & B)
Your 282893/282895 Princess refrigerator has
been designed for cooling food and beverages
(min. 10 °C). The appliance is also suitable for
heating food and beverages (max. 45 °C). The
maximum capacity of the appliance is 14 litres.
The appliance is suitable for indoor use (AC,
220-240V) and for use in a vehicle (DC, 12V).
The appliance is suitable for domestic use only.
1. Door
2. Door handle
3. Handgrip
4. Cooling compartment
5. Removable plate
6. Removable tray
7. Ventilation slots
8. Heating/cooling selector switch
9a. Cooling indicator
9b. Heating indicator
10. DC/AC selector switch
11. DC connection (12V)
12. AC connection (220-240V)
13. DC power cable (12V)
14. AC power cable (220-240V)
Initial use
Preparation
• Clean the appliance. Refer to the section
"Cleaning and maintenance".
• Clean the accessories. Refer to the section
"Cleaning and maintenance".
Assembly (fig. B)
Before you proceed, we need you to pay
attention to the following notes:
- Make sure that there is sufficient space
around the appliance to allow heat to
escape and provide sufficient ventilation.
Minimum distance to wall or other objects:
10 cm.
• Place the appliance on a stable and flat
surface.
• Pull the door handle (2) to open the door (1).
• Place the removable plates (5) into the
cooling compartment (4).
• Mount the removable tray (6) to the door (1).
• Close the door (1) until the door handle (2)
locks into place.
Use
Switching on and off (fig. A)
• To switch on the appliance, set the heating/
cooling selector switch (8) and the DC/AC
selector switch (10) to the required position.
• To switch off the appliance, set the heating/
cooling selector switch (8) and the DC/AC
selector switch (10) to the off position.
Selecting the cooling function or
the heating function (fig. A)
Before you proceed, we need you to pay
attention to the following notes:
- Switch off the appliance for 30 minutes
when changing from cooling to heating or
from heating to cooling.
• To select the cooling function, set the
heating/cooling selector switch (8) to the
COLD position. The cooling indicator (9a)
comes on.
• To select the heating function, set the
heating/cooling selector switch (8) to the
HOT position. The heating indicator (9b)
comes on.
• To switch off the cooling function or the
heating function, set the heating/cooling
selector switch (8) to the off position. The
corresponding indicator (9a/9b) goes off.
Selecting alternating current or
direct current (fig. A)
The appliance can be operated using alternating
current (AC, 220-240V) for indoor use or using
direct current (DC, 12V) for use in a vehicle.
7