Fizz Creations 1781 Instrucciones De Uso página 2

MAKING YOUR OWN
BUZZER
This product includes everything you need to
make your own Buzzer!
Follow the instructions and you'll have made
your own Buzzer in no time! You will need to
use the double-sided tape & connecting pegs
to hold together the card nets and the tech
within. Closely follow the step by step guide
and use the reference key to ensure it is
completed successfully.
Attaching Components
Double Connecting
Sided Tape Pegs x 8
(1)
Electrical Components
(2)
Top Tip!
Before you start it helps to fold along
the crease lines to further define the
shape – this makes it much easier
further down the line!
If one layer of double sided tape
comes unstuck. Apply another strip
to the other side of the card so you
are sticking tape to tape. This will
ensure it is held together.
You will need:
3 x AAA Batteries
(not included)
Hook
Battery Pack (3)
Wire Sockets
(5)
2
(4)
Buzzer Wire
(6)
GB