Blackfire BFX-C20 Guia De Inicio Rapido página 8

BLACKFIRE BLUETOOTH® CONTROLLER BFX-C20 FOR PS4™
• INSTRUCTIONS MANUAL •
1. PACK CONTENTS
1 x BLUETOOTH® wireless controller compatible with PS4™.
1 x USB charging cable included.
1 x Instructions manual.
2. PRODUCT FEATURES
• Wireless Bluetooth® controller (version 4.2) compatible* with PS4™.
• Rechargeable 600mAh Li-Ion battery pack built-in.
• Ergonomic design specially for long gaming sessions.
• SHARE, OPTIONS and HOME buttons, button in touchpad (no touch function), L2/R2 progressive
triggers.
• Minijack port for headset and speaker also included.
• VIBRATIONDUO™ dual & exclusive vibration motors also included.
• 0.8m USB-microUSB charging cable included.
• Updatable through USB.
3. CONNECTION AND SETUP
In order to connect the controller to your PS4™ system, please follow the steps below:
3.1. For first use or after a system update, you must link the controller with the system
according to the following steps:
• First, make sure your PS4™ system is powered on.
• Plug the USB cable connector into a free USB slot from your console; the LED indicators of the
controller will turn on and make a LED breathing slow effect.
• Next, press the HOME button: first, LED will flash rapidly and then LED will remain still when the
link is successful; now you can unplug the cable from controller and use it.
• LED indicators color change based upon player number: BLUE, RED, GREEN, PURPLE.
3.2. For regular use, when you have already linked the controller following the previous steps:
• With your console PS4™ turned or on off, press HOME button on the controller.
• When LED indicators remain turned on (no flashing), the controller will be linked an ready for use.
IMPORTANT: You may need to re-sync your controller after a PS4™ firmware system update.
4. CHARGING THE CONTROLLER
• In order to charge the battery from the controller, plug one side of the USB included cable into the
microUSB plug from the controller, and the other side to a free USB slot in your PS4™ console. NOTE:
You must power on the PS4™ system to start charging process; with the console powered off, the
controller will not charge even with the USB cable plugged.
• During the charging process, all 4 player LED indicators in the controller will flash to indicate that
the charging process has started (LEDs fixed -no flashing- if controller is not linked to the console).
• The controller will be fully charged once the LED indicators stop flashing and remain still.
• When the battery pack power is too low, all 4 LED indicators will start flashing slowly in order to
indicate that you need to recharge the battery pack.
If so, please follow the above steps in 3.1.
8
EN