Fire Pit Kit Installation - EcoSmart Fire Round 20 Manual De Instalación

ENGLISH
Fire Pit Kits
Installation
1. Construct the fire pit surround/platform following the Cutout/
Clearance Dimensions shown in the table below.
W
Cutout/Clearance Dimensions
Physical appliance dimensions should be verified against cut out dimensions BEFORE
installation begins to confirm tolerances align.
L
APPLIANCE mm [in]
Round 20 594 [23.4]
Square 22 587 [23.1]
Linear 50
1167 [45.9]
Linear 90
2258 [88.9]
Linear 130
3346 [131.7]
Linear Curved 65
1600 [63]
IST = Indoor Safety Tray
www.ecosmartfire.com
D
W
ROUND CUTOUT EXAMPLE
D
L
LINEAR CUTOUT EXAMPLE
Minimum Dimensions
W D D (WITH IST)
mm [in]
mm [in] mm [in]
594 [23.4] 248 [9.8] 215 [8.5]
587 [23.1] 248 [9.8] 215 [8.5]
402 [15.8] 206 [8.1] 167 [6.6]
402 [15.8] 206 [8.1] 167 [6.6]
167 [6.6]
402 [15.8] 206 [8.1]
167 [6.6]
420 [16.5] 206 [8.1]
2. Insert the metal tray into the cutout.
3. For Indoor Installations insert the Indoor Safety Tray. The appliance
must not be operated indoors without the Safety Tray installed.
For outdoor installation go to Step 4.
4. Insert Burner into metal tray.
e-NRG Bioethanol is the only fuel to use in this appliance.