Using the integrated wide-angle
diffuser / telephoto lens cover
The wide-angle diffuser and the telephoto lens
cover change the beam angle of the flash unit.
The wide-angle diffuser enlarges it so that
shots with focal lengths up to 24mm
illuminated uniformly.
This requires a reduction of the guide number
and hence the range as well. By contrast, the
telephoto lens cover bundles the light cone for
focal lengths of 85mm
the guide number and hence increases the
range.
1) Focal length information based on 35 mm format
1)
are also
1)
and more, increases
Wide-angle diffuser
When not in use, the integrated wide-angle dif-
fuser is pushed into the body of the flash unit
below the reflector cover.
Pull the diffuser vertically out of the flash
body and allow it to fold onto the reflector
cover of the flash unit.
The diffuser is held in position by spring force.
To remove it, proceed in the reverse order.
Telephoto lens cover
Place on the reflector cover of the flash unit
so that the lens cover snaps into place.
Pull to remove.
50