Safety Instructions; Power Supply - Velleman WC8205 Manual Del Usuario

WC8205 – DCF77-CONTROLLED CALENDAR
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the WC8205! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.

2. Safety Instructions

Keep this device away from rain and moisture.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
• Note that damage caused by user modifications to the device is not covered by the warranty.
• Keep the device away from children and unauthorised users.

3. Power Supply

• Open the battery compartment at the back and insert 2 x AA batteries respecting the polarity. Close the battery
compartment.
• Use of alkaline batteries is recommended.
• Never use old and fresh batteries at the same time.
• Take out the batteries if the device is not used for a long time.
4. Setting
• Time Setting
o In normal time setting, press SET for 2 seconds to enter the time setting mode.
o Press SET to choose day / language → 12/24h → seconds → hour → minutes → year → month → date
→ normal time display in this order.
o Modify a blinking item with UP/°C/°F. Hold the button pressed to modify rapidly. Press SET to confirm.
o Day / language: Press UP/°C/°F to select one of the supported languages (E for English, D for German, F for
French, I for Italian and S for Spanish).
o If no button is pressed for 60 seconds, the calendar will automatically return to the normal display mode.
o The day will automatically be modified when modifying the date.
• Alarm Setting
o In normal time setting, press MODE to enter the alarm mode. Hold SET pressed for 2 seconds to enter the
alarm setting mode.
o Press SET to choose hour → minutes → alarm mode in this order.
o Modify a blinking item with UP/°C/°F. Hold the button pressed to modify rapidly. Press SET to confirm.
o In alarm mode, press UP/°C/°F to switch the alarm on or off ( will appear or disappear).
WC8205 3 VELLEMAN