Function Description - Funkwerk Active antenna Manual De Instrucciones

Function Description

The Active Antenna À is suitable for the frequency band range GSM 900, GSM 1800
and UMTS Band I. It supports the transmission process GPRS, HSCSD, EDGE,
UMTS, HSDPA and HSUPA. The connection to the terminal devices is effected using
the mounting  UMTS data stick included in the supplies.
The set of an active antenna consists of a basic device [antenna with integrated am-
plifier], a 15 m long coaxial line, a wall power supply unit  and a mounting  with
integrated connecting antenna for UMTS data sticks.
The following connections are found on the mounting:
• Plug connector for the connection of the coaxial line to the active
antenna
• 2,1 mm barrel connector for supply voltage
The supply voltage required is provided by the enclosed external power supply unit
 (8 V, 0,9A).
The active antenna amplifies the UMTS mobile radio signal between the terminal
device and the outdoor antenna in transmission and receiving direction. Further-
more, an additional yield of approx. 7dB is achieved through the directive array. In
the GSM frequency bands the antenna is passive, no boosting is effected.
Note transmission direction!
22