General Safety Instructions - Komax Kappa 310 Manual De Instrucciones

General safety instructions

Operating instructions
The operating instructions are an integral part of the machine. You must read the operating
instructions and make sure you understand them before working with the machine.
Pay especially close attention to the safety and warning instructions.
Instructions for accessories
Besides heeding the safety instructions in these operating instructions, make sure to obey
the safety instructions in the instructions for the modules and accessories.
Safety of persons
Personal safety is guaranteed only for a single machine operator. Anyone working on the
machine must always be careful not to enter a command that puts others in danger.
Personnel qualifications
Only individuals with the appropriate qualifications are allowed to operate, set up, and
maintain the machine.
Technical condition of the machine
Safe operation
If you have reason to believe the machine can no longer be operated safely, you must put it
out of operation and secure it against being switched on unintentionally.
Safety devices
The machine may only be operated with properly functioning safety devices.
It is not permitted to remove or bridge safety devices or tamper with them in any way.
Maintenance
The machine must be serviced at the indicated time intervals.
Machine damage could occur if the machine is not serviced regularly.
Spare parts
Defective parts must be replaced with original spare parts. These original spare parts are
available for purchase from Komax.
Modifications
Basically speaking, the machine is not allowed to be modified. If modifications prove
necessary, you may not carry them out without first consulting Komax.
Software modifications
It is forbidden to modify the software in any way.