System Requirements; Hardware Description - SMC Networks EZ-Connect SMC 2802W Guia De Inicio Rapido

System Requirements

• A PC running Windows 98SE/Me/2000/XP.
• CD-ROM drive.
• An available bus-mastered PCI.
• Minimum of 32MB RAM and 300 MHz CPU.
• Minimum of 6MB available hard disk space for utility and driver
installation.
• Another IEEE 802.11b, or 802.11g compliant device installed on
your network such as the Barricade™ g 2.4GHz 54Mbps Wireless
Broadband Router with Print Server (SMC2804WBRP-G), or
another wireless adapter, such as the EZ-Connect™ g 2.4GHz
54Mbps Wireless Cardbus Adapter (SMC2835W).
3

Hardware description

SMC's EZ-Connect™ g 2.4GHz 54Mbps Wireless PCI Card
(SMC2802W) is a high speed IEEE 802.11g-compliant wireless
network adapter that supports up to 54Mbps data rate, and
seamlessly integrates with existing Ethernet networks to support
applications such as mobile users or temporary conferences. This
solution offers a high data rate and reliable wireless connectivity
with considerable cost savings over wired LANs (which include
long-term maintenance overhead for cabling). Just install enough
wireless access points to cover your network area, plug wireless
cards into your notebooks or computers, and start networking.
The EZ Connect™ g 2.4GHz 54Mbps Wireless PCI Card has two
status LED indicators:
LED Status Function
Power/Link On Indicates a valid connection with
an access point.
Flashing Indicates that the Wireless PCI Card is
operating in the 802.11 ad hoc mode.
Activity Flashing Indicates that the Wireless PCI Card is
browsing active access points.
4