Declaration Of Conformity - river systems MISTRAL 650R Manual De Usuario

riversystems.it
Thank you for purchasing this River Systems® product, the
result of technological innovations and constant research!
This manual provides all instructions and advices to properly use the MISTRAL mill safely and efficiently. Read
riversystems.it
carefully all parts of this manual before using the machine in order to intervene correctly in the maintenance
and to take full advantage of the specific characteristics of the mill.
The descriptions and illustrations contained in this manual are not binding; illustrations are only for illustrative
purposes. River Systems srl therefore reserves the right to make changes at any time without obligation,
to update the publication, to modify components and accessories for further improvement, or for any
manufacturing and/or commercial reason to improve safety and functionality.
riversystems.it
The instructions, drawings, tables and all contents of this manual are of a technical nature and reserved; for
this reason, no information can be communicated to third parties without written consent from its sole owner,
River Systems srl.

DECLARATION OF CONFORMITY

riversystems.it
The undersigned Stefano Concina as legal representative of company River Systems® s.r.l. based in Via
Marco Polo, 33 (ZI) 35011 Campodarsego, Padova (Italy), VAT code: 04289370282 declares that the mill as
per the label below
riversystems.it
riversystems.it
has been manufactured complying with the following standards:
2006/42/CE - DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 17 May
2006 on machinery - 17 May 2006
riversystems.it
2014/30/UE - DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26
February 2014 on the harmonization of the laws of the Member States relating to electromagnetic compatibility
- 26 February 2014
and with the following technical standards:
riversystems.it
UNI EN ISO 12100 - Safety of machinery, General principles for design, Risk assessment and risk reduction
- 25 November 2010
UNI EN ISO 13857 - Safety of machinery, Safety distances to prevent hazard zones being reached by upper
and lower limbs - 05 March 2020
CEI EN 60204-1 - Safety of machinery, Electrical equipment of machines - Part 1: General requirements - 01
December 2018
UNI EN 1672-1 - Food processing machinery, Basic concepts - Part 1: Safety requirements - 06 November
2014
UNI EN 1672-2 - Food processing machinery, Basic concepts - Part 2: Hygiene requirements - 25 June 2009
riversystems.it
and therefore, conforms with the standards in force.
This declaration shall cease to be valid if the machine is modified without our prior approval.
Campodarsego, 09.11.2020
riversystems.it
NOTICE
BEFORE PERFORMING ANY OPERATION, READ CAREFULLY THIS USER MANUAL.
riversystems.it
Copyright © River Systems - All rights reserved
riversystems.it
riversystems.it
riversystems.it
riversystems.it
STICK HERE THE LABEL
SUPPLIED WITH THE PRODUCT
riversystems.it
riversystems.it
riversystems.it
riversystems.it
riversystems.it
- 15 -
riversystems.it
riversystems.it
riversystems.it
riversystems.it
riversystems.it
riversystems.it
riversystems.it
EN
riversystems.it
riversystems.it
riversystems.it