Ferm PRM1015 Traducción Del Manual Original página 4

ROUTER
PRM1015
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers. All
products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for
many years to come.
For your own safety and for the safety of
others, please read these instructions
carefully before using this appliance. It
will help you understand your product
more easily and avoid unnecessary
risks. Keep this instruction manual in a
safe place for future use.
Introduction
The router has been designed for routing of wood
and wood products. Check the machine, for loose
parts and accessories from transport damage.
Contents
2. Safety instructions
3. Assembly
4. Operation
5. Maintenance
1. MACHINE SPECIFICATIONS
Technical specifications
Voltage
Frequency
Power input
No load speed
Cutting depth
Collet
Weight
Lpa (sound pressure)
Lwa (sound power)
Vibration left handle
Vibration right handle
4
230 V~
50 Hz
1300 W
9000-30000/min
60 mm
6 & 8 mm
3.57 kg
87.9+3 dB(A)
98.9+3 dB(A)
2
3.509+1.5 m/s
2
2.441+1.5 m/s
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with a
standardised test given in EN 60745; it may be used
to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
- the times when the tool is switched off or when
it is running but not actually doing the job, may
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Contents of packing
1 Router
1 Parallel guide
1 Carbon brush set
1 Template guide
1 Adapter for dust extraction
1 Spanner
1 4 mm hex key
1 Collet 8 mm (assembled on the machine)
1 Collet 6 mm
6 Router bits
1 Safety instructions
1 Operating instructions
1 Warranty card
Product information
Fig. A1, A2 & C
1. On/off switch
2. Handle
3. Base plate
4. Fixing screws for parallel fence
5. Switch lock button
6. Collet nut
7. Spindle lock
8. Plunge depth adjustment button
9. Wing bolt for depth stop
10. Depth stop
11. Clamping lever
12. Plunge depth scale
13. Adjusting wheel for electronic speed control
16. Dust extraction facility
17. Parallel fence ruler