Functional Description; Intended Use; Product Features; Technical Data - Bosch GSB 13 RE Professional Manual Original

OBJ_BUCH-67-005.book Page 16 Tuesday, November 20, 2007 8:38 AM
16 | English
Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for impact drilling in
brick, concrete and stone as well as for drilling
in wood, metal and plastic. Machines with elec-
tronic control and right/left rotation are also
suitable for screwdriving and thread-cutting.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Keyless chuck*
2 Front sleeve
3 Rear sleeve
4 "Drilling/Impact Drilling" selector switch
5 Lock-on button for On/Off switch
6 On/Off switch
7 Thumbwheel for speed preselection
(not for machine version 3 601 B17 103)
8 Rotational direction switch
9 Button for depth stop adjustment
10 Wing bolt for adjustment of auxiliary handle
11 Auxiliary handle*
2 609 140 533 | (20.11.07)
12 Depth stop*
13 Chuck key*
14 Key type drill chuck*
15 Universal bit holder*
16 Screwdriver bit*
17 Allen Key**
18 Open-end spanner**
*The accessories illustrated or described are not in-
cluded as standard delivery.
**Commercially available (not included in the deliv-
ery scope)

Technical Data

Impact Drill
Article number
Rated power input
Output power
No-load speed
Rated speed
Impact rate
Rated torque
Right/left rotation
Spindle collar dia.
Max. drilling dia.
– Brickwork
– Concrete
– Steel
– Wood
Chuck clamping range
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
GSB 13 RE
Professional
3 601 B17 1..
W 600
W 301
0 – 2800
rpm
rpm 1570
bpm 25070
Nm 1.8
mm 43
mm 15
mm 13
mm 10
mm 25
1.5 – 13
mm
kg 1.8
/ II
Bosch Power Tools