Cleaning And Maintenance; Technical Data - Valueline VLS-DVBT-FTA1 Manual De Usuario

"System"
"USB"
Adjust the system settings:
1. Select the menu item.
2. Adjust the setting.
3. Press the OK button.
4. Press the exit button to exit
the menu.
"Parental Guidance": Restrict access to
channels that are unsuitable for
children. To lock the channel, enter
the password.
"Set Password": Change the password
for locked programs. Enter the old
password, followed by the new
password. To confirm, enter the new
password again.
"Factory Default": Enter the password
and press the OK button to return to
the factory settings. All channels and
settings will be deleted.
"Information": View information
regarding the model, the hardware
and the software.
Adjust the USB settings:
1. Select the menu item.
2. Adjust the setting.
3. Press the OK button.
4. Press the exit button to exit
the menu.
"Multimedia":
1. Connect a USB device.
2. Select "Music", Photo" or "Movie".
3. Adjust the setting.
4. Press the OK button.
"Photo Configure":
• "Slide Time": Set the slide show
interval.
• "Slide Mode": Set the slide show
effect.
• "Aspect Ratio": Display the photo
with its original aspect ratio.
• "Discard": Display the photo in
full-screen mode.
"Movie Configure":
• "Aspect Ratio":
- "Keep": Play the movie with its
original aspect ratio.
- "Discard": Play the movie in
full-screen mode.
• "Subtitle Specific":
"Small" / "Normal" / "Big": Display
subtitles in small mode, normal
mode or large mode.
• "Subtitle BG":
- "White" / "Transparent" / "Gray" /
"YellowGreen": Display subtitles in
white, transparent, grey or
yellow-green background.
• "Subtitle FontColor":
- "Red" / "Blue" / "Green" / "White" /
"Black": Display subtitles in red,
blue, green, white or black font.
"PVR Configure":
• "Record Device": Select the disk for
recording.
• "Format": Format the selected disk.
7 7

Cleaning and maintenance

Warning!
• Before cleaning or maintenance, switch off the
device, remove the mains plug from the wall
socket and wait until the device has cooled
down.
• Do not use cleaning solvents or abrasives.
• Do not clean the inside of the device.
• Do not attempt to repair the device. If the
device does not operate correctly, replace it
with a new device.
• Clean the outside of the device using a soft,
damp cloth. Thoroughly dry the outside of the
device with a clean, dry cloth.

Technical data

Input voltage
Frequency
Electrical power
Tuner
Input frequency
RF input level
IF bandwidth
Modulation
File format
Audio
Video
English
100 - 240 V AC
50 - 60 Hz
8 W
170-230 MHz / 470-860 MHz
-25 ~ -78 dBm
7 MHz / 8MHz
QPSK / 16 QAM / 64 QAM
MPEG-1
MPEG-2 / MPEG-4