Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LUBRICATION & MAINTENACE
Oil the tool before each use with 4 to 5 drops air tool oil, placed in the air inlet is sufficient.
Use proper air pressure and CFM rating listed for this tool.
Drain water from hoses and compressor tank.
Water in the air supply system damaged the tool and loss of power.
Clean or replace air filters at prescribed intervals from.
RECOMMENDED COMPRESSED AIR SYSTEM
No
1
Air Tool
2
Air Hose
3
Quick Coupler
4
Oiler (only required for air tools with motor)
5
Pressure Regulator
TOOL COMPONENTS
1
Grinding disc holder
2
Grinding disc holder
3
Grinding disc holder
4 Trigger
5 Safety lever
6 Air regulator
7 Air connector
8 Locking hole
9 Locking pin
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Description
30 mm
50 mm
75 mm
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
No
Description
6
De-Watering / Filter Unit
7
Pressure Drain Valve
8
Shut-Off Valve
9
Dryer / Filter Unit
10
Compressor / 11 De-Watering Valve
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
Tabla de contenido
