Faults And Errors - Maddalena ElecTo BULK Instrucciones Para La Instalación, El Uso Y El Mantenimiento

Description
Flow volume (standard display)
Water temperature/Instant flow
Display test

1.7.1 Faults and errors

Faults
Empty tube
The temperature of the water is low (the error
message appears when the temperature is
below 4°C)
Overflow
Errors
E1-11: measuring channel 1 - circuit fault
E1-22: measuring channel 1 - faulty transducer
or measuring channel or reduced flow signal
E2-11: measuring channel 2 - circuit fault
E2-22: measuring channel 2 - faulty transducer
or air in the measuring channel or reduced flow
signal
Seals
A seal is applied to the meter. Opening the meter ruptures the seal. Interventions must be
performed by a manufacturer-approved centre.
Do not alter or remove the meter seal. Altering or removing the seal invalidates the war-
ranty.
26
EN
Screenshots
Screenshots
Screenshots