River ET Super Instrucciones Adicionales página 5

riversystems.it
riversystems.it
Only for those who have an incubator ET Super.
This model of incubator comes with the same basic operating characteristics as the ET one (see attached user manual),
riversystems.it
but with some extra functions that make it more performing and functional..
DISPLAY
• The display shows the temperature as the main function
• (*) When the other functions are activated, after 4 seconds the display will show again the temperature
riversystems.it
• Press the menu key ( ) to change the function and the
FUNCTIONS
riversystems.it
riversystems.it
riversystems.it
1x
riversystems.it
riversystems.it 2x
riversystems.it
riversystems.it
x3 sec
riversystems.it
Copyright © 2018 River Systems - All rights reserved
riversystems.it
Incubator ET Super
Additional instructions
riversystems.it
and
riversystems.it
To set and adjust the temperature, press the
panel.
(Make reference to chapter 4C of the user manual)
To view the temperature in degrees Fahrenheit (F), instead of °C enter the
Programme Mode by pressing the
riversystems.it
press the and keys simultaneously until the °F appears.
Press once to select the INCUBATION DAYS function
The word DAYS appears on the display, followed by a number indicating the
riversystems.it
incubation day. (*)
It will be necessary to reset the day counter when every new incubation cycle
starts. To reset the counter, enter the DAYS function and keep the keys
pressed at the same time until resetting (the display will shows "1"). It is anyway
possible to modify the datum while the incubator is working by pressing menu ( )
to display DAYS. Press the
the key to display the desired day. Press again menu ( ) to confirm.
riversystems.it
Press twice to select the FAN SPEED function
The letter F appears on the display followed by a number. The numbers range
from 1 to 5 depending on the speed you want to set. Press the
to choose the speed. After 3 seconds the new setting is memorized.
F1 = 40% (minimum speed)
F2 = 50%
F3 = 60% (recommended for hatching)
F4 = 80%
F5 =100% (standard speed with which the machine is set, ideal for incubation).
riversystems.it
Hold down the key to turn on the INTERNAL LIGHT
Press and hold the menu key ( ) for 3 seconds to turn on the internal light. Lit on
appears on the display. (*)
The internal light stays on for 1 minute then it goes off automatically.
riversystems.it
To turn off the light, hold down the menu key ( ) for 3 seconds. Lit off appears
on the display.
5
riversystems.it
keys to change the values.
key or the
riversystems.it
key or the key (the P letter blinks). Then,
key until the letter "P" appears. Press the
riversystems.it
riversystems.it
riversystems.it
ET Super
riversystems.it
riversystems.it
key on the control
riversystems.it
and
key or
riversystems.it
key or the key
riversystems.it
EN