Care And Maintenance; Troubleshooting - Utilitech Pro 6290 Manual De Instrucciones

7. Press the rocker switch.

CARE AND MAINTENANCE

Your portable LED work light requires very little care and maintenance. Simple clean the lens, lamp
head and lamp stand regularly with a non-abrasive cleaner.
Warning: Always make sure the work light is unplugged and completely cool before attempting to
clean it.
CAUTION: Turn OFF all power to circuit at main circuit breaker or fuse box. DO NOT rely on
wall switch alone to turn off power.

TROUBLESHOOTING

PROBLEM
The light will not
illuminate.
The extension
lock is difficult to
lock.
WARRANTY
FIVE-YEAR LIMITED WARRANTY
If this product fails due to a defect in materials or workmanship within five (5) years from the date of
purchase, return it along with proof of date of purchase and it will be replaced with the same or
comparable model free of charge.
This warranty is void if damage or defect has resulted from accident, abuse, misuse or faulty repair.
This warranty gives you specific legal rights and you may have other rights that vary from state to
state.
IN NO EVENT WILL LIABILITY EXTEND TO ANY CONSEQUENTIAL, SPECIAL, INCIDENTAL
OR INDIRECT DAMAGES OF ANY KIND ARISING OUT OF THE USE OR MISUSE OF THIS
PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE EXCLUSION OR LIMITATION
MAY NOT APPLY TO YOU.
SAVE THESE INSTRUCTIONS.
POSSIBLE CAUSE
1. The power is off.
2. The switch is off.
3. There is poor connection between
the cable and outlet.
1. The screw beside the extension
lock is loose.
CORRECTIVE ACTION
1. Make sure the power supply is on.
2. Make sure the switch is on.
3. Make sure the connection is OK.
1. Fix the screw firmly by using a
Phillips screwdriver (not included).
7
7