Oxygenics Genius Amp Instrucciones De Instalación

A
mp
EASY INSTALLATION
INSTRUCTIONS
STEP 1 STEP 2
Remove your Remove any
existing shower remnants of old
head. To remove, plumber's tape
turn the existing and flush out
shower head in a shower pipe for
counterclockwise 5 to 10 seconds.
direction.
STEP 4 STEP 5
Screw the diverter In a clockwise
clockwise onto direction, screw
the taped portion fixed unit onto
of the shower the taped portion
arm. Wrap of the diverter
plumber's tape and hand
3 turns around tighten.
threaded ends of
the diverter.
ATTENTION:
SMOOTH END OF HOSE ATTACHES
TO SHOWER HEAD
EASY TWIST SPRAY
SELECTION
Enjoying multiple spray
patterns during your
shower has never
been easier. With
the Amp's easy twist
design, simply rotate
the easy spray selector
for a quick spray change.
STEP 3
Wrap plumber's
tape clockwise
3 or 4 turns
around threaded
end of shower
arm.
STEP 6
Attach hex nut end of
hose to diverter and
hand tighten. Attach
conical nut end of
hose to handheld
shower and tighten.
Place handheld unit
into holder on right
side of the diverter.
USING THE DIVERTER
To change the shower spray: Place your
index finger on one lever and your thumb on
the other lever and rotate either clockwise or
counter clockwise (depending on the current
position) until you feel it click into place.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
1.775.420.5600
or
Support is also available via email at
support@oxygenics.com
Be sure to visit our website at
www.oxygenics.com
Business Hours:
Monday-Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST
For use with automatic
compensating valves
rated at 1.50 GPM
(5.68 L/min) or less.