Description Of Parts - Semilac UV LED 24W/36 Manual De Instrucciones

Only use AC adapters intended for this device. Do not apply voltage
other than indicated on the device. This equipment may be used by
children over 8, persons with limited physical and mental capacity
as well as individuals without any experience or unfamiliar with
the equipment, provided that supervision or instruction concerning
safe use of the equipment is provided in a way ensuring the
understanding of potential dangers. Children should not be allowed
to play with the device. Children should not be allowed to perform
cleaning or maintenance of the device unsupervised.
UV LED LAMP 24W/36 SEMILAC
PACKAGE CONTAINS
Semilac UV LED lamp (x1)
Semilac UV LED lamp AC adapter (x1)
Instruction manual (x1)

DESCRIPTION OF PARTS

1. 30 s timer button
2. 60 s timer button
3. 99 s timer button – low heat mode
4. Digital display
5. Infrared sensor
6. Power supply socket
INSTRUCTION MANUAL
• Please read the instruction manual carefully before use. The intended use of the lamp is curing hybrid, UV gel and acrylic-gel
nail products. The UV LED lamp is programmed with curing times ensuring thorough and complete curing of each layer of
hybrid, UV gel and acrylic-gel nail products.
• Connect the lamp to a power source with the power supply cord. Make sure to securely connect the AC power supply cord to
the lamp. First connect the power supply cord to the lamp, and only then connect the AC power supply to a power source.
• A single push of a particular mode button (30 s, 60 s, 99 s) will activate that mode. A second push of the mode button will
turn off that mode. The lamp additionally features a motion sensor which activates the last active time mode after inserting
a hand or foot.
SPECIFICATIONS
Dimensions: 206 x 118 x 70 mm
Net weight: 0,3 kg
UV wavelength: 365 nm + 405 nm
Input voltage: 100-240 VAC
Output voltage: 12 VDC/2 A
Power: 24 W (max)
The low heat mode cures hybrid nail products by gradually increasing power to 36 W.
CHARACTERISTICS
• Curing times: 30 and 60 seconds
• Low heat mode: 99 seconds
• Motion sensor
• 21 LEDs
• Digital display
• No need to change LED bulbs
EN 3