Intenso WPD10000 Manual Del Usuario página 15

Normal charging:
Use a standard USB power supply or a port with USB on a computer to charge the Powerbank via
the Type C Out/In port (maximum 5V-3A = maximum 15 watts).
Fast charging:
To charge the Powerbank with a maximum power (18 watts), please use a power supply unit sup-
porting the Power Delivery Standard (PD). The fast charging is indicated by an LED as well which
now lights up blue. If the LED does not change from white to blue, your power supply unit or the
cable used are incompatible with the PD standard and the Powerbank will be charged normally.
b) Charging devices with the Powerbank
Wireless charging:
Activate the wireless charging function by pressing the On/Off button on the Powerbank. Now
place your Qi-capable device centrally across the wireless charging area. The charging process
starts automatically. If this is not the case, please check whether
the Powerbank is adequately charged. For this purpose, at least one of the status LEDs
must be permanently lit.
a foreign body is located between the devices.
your device is Qi-capable.
where the correct position for wireless charging is located on your device. You may
possibly have to place it in another position.
The activated wireless charging process will be displayed by an orange LED.
The positioned device will be charged with a maximum of 10 watts. The amount of watt which
are actually transferred depends on the charged device. If another device is charged through
a cable, the maximum power will be reduced to 5 watts.
In order to end the charging process, you just have to remove your device from the Power-
bank.
The ambient temperature level influences the charging speed, since the charging control of
most mobile devices reduces the power consumption when reaching higher temperatures.
Wired charging:
This Powerbank is equipped with two USB A ports (USB 1 Out/USB 2 Out) and a port Type C
(Type C Out/In).
The two USB A ports support the Qualcomm Quick Charge (QC) 3.0 standard (normal output:
5V-3A max.; Output QC: 5V-3A, 9V-2A, 12V-1.5A = max. 18 Watt). The connection Type C
supports the Power Delivery (PD) standard (normal output: 5V 3A max.; PD output: 5V-3A,
9V-2A, 12V-1.5A = max. 18 Watt) as well a the above-described QC standard.
You can charge several devices at the same time with the Powerbank as well, for example
a tablet on the out port USB 1 and a smartphone on the Out/in port of Type C or without
wire through the Qi area. In this case, please note that neither the QC nor the PD standard
are available, but a maximum of 5V with a total of maximum 15 watts (maximum 5 watts
wireless) can be reached.
To charge your device, just connect the supplied cable to the connection Type C (Out/In Type
C) of the Powerbank and the other end to the connection Type C of the device to be charged.
EN - Page 4 of 8