Reelcraft SGA3650 OLP Instrucciones De Operacion Y Lista De Partes página 3

Series S
Operating Instructions and Parts List
How to mount the reel
The hose reels are fitted with an all position
locking system, which allows the reel to
operate in all positions. The reel is
supplied as standard with a mounting
system and brackets that allow ceiling
mounting or wall mounting - an optional
floor or under bench mount can be
purchased for other mounting positions see
the following page for examples.
The optimum height for wall mounting is
such that it allows the hose or cable to be
pulled at an upward or a downward angle
of no more than approx. fifteen degrees -
angles exceeding this can create undue
drag in operation and potentially cause
premature wear to the mouth opening of the
reel.
For wall mounting where heights above 9
feet are required we suggest the use of the
swivel mounting optional floor bracket.
Bolt the bracket to the wall and fix the reel
in position as you would for ceiling
mounting — see example on the following
page.
How to use the reel
Once you have mounted your reel and
made the inlet connection you are ready for
Reelcraft Industries, Inc. • 800-444-3134 or 260-248-8188 • Fax: 260-248-2605
operation. In order to familiarize yourself
with the function of the reel stand as close
as possible to the reel, pulling the hose
slowly out you will note a clicking noise.
This is the locking pawl running over the
locking teeth or ratchet teeth.
As soon as you hear this noise stop pulling
and allow the hose to retract a little and it
will lock in position. If it won't lock allow
the hose to retract back further then pull it
again slowly until you hear the first one or
two clicks stop pulling and allow the hose
to retract a small amount and it will lock.
Typical mounting
Fixed floor mount
Ceiling mount
Note: The orientation of the wall brackets is
important. Please follow drawings
reelcraft@reelcraft.com • www.reelcraft.com
Now pull it out some more until you here
the next set of clicks and repeat the locking
process. The hose will lock about every 3
feet or 1metre increments but only after you
have been pulling it with an outward
movement. The locking system is designed
so that the hose will never lock when
rewinding the hose.
Once you are familiar with the system you
won't need to listen for the locking clicks,
as you will automatically know when and
where it will lock.
Never let the hose fly back uncontrolled
this can cause damage to property or
person.
S261398
Always keep a firm hold of the hose as it is
retracting back into the reel.
To rewind the hose pull it out about 1ft or
300mm and then allow it to retract back
while holding the hose. If you want to stop
the rewinding and lock it in position again,
pull some hose out until you hear the
clicking and allow it to retract a little
locking the hose in position.
SGA3650 OLP SWA3850 OLP
SGA3665 OLP SHA3850 OLP
SGA3850 OLP SCA3850 OLP
3