Basic Operation - Denver IFI-710 Manual De Instrucciones

1. BASIC OPERATION

1). Turning on/ off the unit
Slide the mains power switch to ON position, press the STANDBY button on the
remote control to turn on the unit (press it again to switch the unit to standby
mode).
Note: Make sure the power plug is properly connected to a 230V ~ 50Hz
household AC power outlet.
2). Operating mode selection (FUNCTION)
Press the AUX/iPod button on remote control or press and hold the PLAY/PAUSE
button on the unit to select iPod Mode, AUX Mode.
3). VOLUME - / VOLUME + Button
Press the VOLUME- / VOLUME+ button on the remote to adjust the sound level to
the desired level.
4). Operating mute function
When listening to iPod, or AUX in, press the mute button on the remote to
activate the mute function (the LED indicator on the top panel will begin
flashing on the display). Press it again to cancel the mute function or press the
VOLUME+/- button to resume the normal mode.
5). Adjust the BASS level
Press BASS + / BASS – on the remote control to adjust the BASS level, it will
enhance/reduce the BASS effect.
6). Adjust the TREBLE level
Press TREBLE + / TREBLE – on the remote control to adjust the BASS level, it will
enhance/reduce the TREBLE effect.
2. LISTENING TO YOUR iPod (iPod is not included)
This unit can support various models of iPod players with 30-pin dock connectors,
such as iPod Mini, iPod photo, iPod video, iPod nano 1st/2nd/3rd/4th/5th Generation
and 3rd /4th (video) generation, iPod 5th generation (video), iPod touch 1st/2nd , iPod
classic and iPhone. Grip the iPod and pull it upwards and out carefully.
It can also act as a battery charger for your iPod when the iPod is connected via the
dock connector. Universal docking station for all iPod own inserts.
Select the iPod universal cradle (not included, check your iPod packing if it came with
this cradle) that fits with your iPod model. Install the cradle with 2 tabs facing the front
by pushing it down in the universal dock on top of the unit. To remove the cradle,
press its inside rear surface and pull it upward.
1). Operating iPod with the main unit
(1) Switch the mains power to on position, press the STANDBY button on the
remote control, or press the PLAY/PAUSE button on the top panel to power on
the unit. Press iPod/AUX button on the remote control or press and hold the
PLAY/PAUSE button on the unit to select iPod function.
OPERATING INSTRUCTIONS
- 6 -