Back Grille; Motor Shaft - Cozy Breeze FT30-U2X El Manual Del Propietario

4. Slide the Fan Blade onto the motor shaft.
Retighten the Screw on the blade assembly
to secure it to the motor shaft. Make sure
that the end of the screw is positioned
within the flat notch on the shaft. Figure 4
5. Remove the Grille Ring from the Front
Grille by loosening the Screw holding it.
6. Place the Front Grille against the
Back Grille and push them together until
the tabs on the grilles hold them together.
Figure 5
7. Slide the Grille Ring over both Front and
Back Grilles ,turning the ring so that the
screw that secures it, is on the
bottom. Figure 6
Tabs
Grille ring
5
Figure 4.
Figure 5.
Figure 6.