H A R D W A R E I N S T A L L A T I O N
Before installing the hardware, please take the following steps:
Ensure that your PC or laptop has been switched off and is unplugged from the mains.
Connect the cables with the help of the diagram below.
1. Button for removing the hard disk
2. for 2.5" Hard Disk
3. for 3.5" Hard Disk
4. Power LED
5. On/off switch
6. Connection for power adapter
7. USB connection
8. eSATA connection
2
3
4
1
5
6
7
8
6
S O F T W A R E I N S T A L L A T I O N :
Microsoft Windows 2000, XP, Vista, Windows 7 and MAC OS 10.3 or higher
Connect the interface cable to the computer, the system will recognise the hard drive
automatically. After installation, the hard drive can be found in "My Computer".
Note: Never remove the hard drive without first clicking on "Safely Remove Hardware".
The device may still be in use. Unsafe disconnection of the hard drive may cause data
loss.
W A R R A N T Y
Unless specifi ed otherwise, all items sold under the ICIDU name are covered by a 10
year warranty. No warranty or support is provided for the software and rechargeable
batteries that are provided. Claims under warranty can be made only via the dealer
from whom the item was purchased.
Specifi cations can be changed without notice.
All ICIDU products comply with current European safety and environmental standards
and legislation. For further details, visit our website www.icidu.com
ICIDU is a registered trademark. All other brand names and rights in
connection with them are and remain the property of the rightful owner.
© Copyright 2010 ICIDU
All rights expressly reserved
7