Descargar Imprimir esta página
Zagg Tadpole Active Instrucciones

Zagg Tadpole Active Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTRUCTION MANUAL
POWER BUTTON
• Press and hold the Power button for two seconds to turn the Tadpole Active
on and off. Press and hold it for ten seconds to reset your speaker.
• When on, press the Power button once to play your music. With music
playing, press the Power button once to pause and resume your music.
• Press the Power button twice in quick succession to skip to the next track
on your playlist, press it three times in succession to return to the
previous track.
• To answer a call, press the Power button once.
• When on a call, press the Power button once to disconnect the call and
return to your music.
LED LIGHT
The LED indicates one of four statuses depending on its color and
illumination.
Solid red – Your Tadpole Active is charging. The LED will turn off when
your Tadpole Active is fully charged. It will also light red for one second
when you turn your Tadpole Active on and off.
Flashing blue every second – Your Tadpole Active is searching for a
device to pair with, or is pairing with a device with which it has already
paired. If no device is found after 60 seconds, the Tadpole Active will
automatically turn off.
Flashing blue every seven seconds – Your Tadpole Active is paired and
ready to play music. It will continue flashing blue every seven seconds
until it is turned off. NOTE: If your Tadpole Active sits idle for 15 minutes,
it will automatically turn off.
Flashing red – Your Tadpole Active is at or below 10% of its remaining
charge.
MICROPHONE
CHARGING PORT
• Charge your Tadpole here by connecting the included
micro USB cord.
• It typically takes one hour to charge the Tadpole Active fully.
When charged, you can enjoy over three hours of continuous music.
PAIRING INSTRUCTIONS
1. Make sure your device's Bluetooth® connection is enabled.
You can do this on many devices by accessing the SETTINGS menu, and then choosing
GENERAL > BLUETOOTH > ON.
2. Turn your Tadpole Active on.
3. Your device will show "Tadpole Active" as an available device. Select this option to
begin pairing.
Changes or modifications not expressly approved
by the party responsible for compliance could void
the user's authority to operate the equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment
and receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
For more help please see:
www.ifrogz.com
To reach a trained customer service representative,
please use one of the following:
ifrogz.com/support
questions@ifrogz.com
1-855-443-7649 [1-855-4IFROGZ]
00-1-801-823-3411 for international customers
©2005 - 2014 ZAGG Inc | All Rights Reserved
NASDAQ: ZAGG | MADE IN CHINA
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1: This device may not cause harmful interference, and
2: This device must accept any interference received,
including interference that may cause undesired
operation.
Warranty Registration
Your iFrogz Tadpole Active Bluetooth® speaker comes
with a one-year manufacturer's warranty. Please keep
your purchase receipt and register your Tadpole Active
on our website (purchases made on our website are
automatically registered). Replacement products must
be mailed back as soon as your new product arrives;
you may incur postage fees as a result. See our website
FAQs for further details. iFrogz is a ZAGG Inc brand.

Publicidad

loading

Resumen de contenidos para Zagg Tadpole Active

  • Página 1 POWER BUTTON PAIRING INSTRUCTIONS • Press and hold the Power button for two seconds to turn the Tadpole Active 1. Make sure your device’s Bluetooth® connection is enabled. on and off. Press and hold it for ten seconds to reset your speaker.
  • Página 2 © 2005 - 2014 ZAGG Inc | Tous droits réservés Rouge solide – votre Tadpole Active est en cours de charge. Le voyant s' éteint lorsque Cet équipement génère, utilise et peut émettre une NASDAQ : ZAGG | FABRIQUÉ...
  • Página 3 NASDAQ: ZAGG | HECHO EN CHINA las comunicaciones radiales. Sin embargo, no existe Rojo solido – Su Tadpole Active se esta cargando. El LED se apagara una vez el garantía alguna que la interferencia no ocurrirá en una Este dispositivo cumple con la parte Nro. 15 de las instalación en particular.